|
Post by twogunsblazing on Nov 2, 2012 10:50:04 GMT -5
I have a caster based in the UK casting up the below Mech for me. The current moulds can produce a fair number of copies and I intend to sell the Mech until the moulds become degraded and start producing unsatisfactory casts, at which point I'll cease selling them. The kit WILL require some modelling skill. It will have a few small holes from air bubbles that will need to be filled with modelling putty and then sanded smooth, in a few spots it will have some light mould lines that need cleaning and there will be spots where the sprue connections have been removed that will require cleaning. Some parts will require pinning, especially if you choose to use the pose-able arms instead of the one-piece arms. The model is 12cm tall and depending on weapon choice and pose, about 9cm wide and 6cm deep. If you would like to buy one, please PM me with your postal address and I will return PM you with payment details. Please note, I live in Australia, work full time and have three school aged kids so due to time zone differences and domestic commitments, I may not return your PM's immediately, but I will check my PM's at least once a day. I will only be accepting Paypal payments. The following costs are in Australian Dollars. The cost of the Mech will be $35. The caster has said the packaging will cost $5 and the postage will depend on where you are located, of course. As stated, the model is cast in the UK and will dispatch from there directly, so postage will be cheaper for UK residents. It's not exactly clear in the pics below...so just to clarify, the shoulder mounted missile launchers are separate pieces to the torso.
|
|
|
Post by mango on Nov 2, 2012 19:53:07 GMT -5
vey cool, the legs look like they are posable with the hip plugs and knee joint, is that correct?
|
|
|
Post by twogunsblazing on Nov 2, 2012 20:41:35 GMT -5
Yes mate. The legs are pose-able on a front to back axis, but not so much on a side to side axis. I did muck around with angling the upper leg out to the side and you can get some pose-ability out to the sides with the legs but not a lot. If pinning was used and a bit of green stuff, I think you could get some decent sideways pose-ability with the legs.
|
|
|
Post by lordnth on Dec 4, 2012 18:38:57 GMT -5
Congrats! I can't wait to give you a review on it.
|
|
|
Post by lordnth on Dec 6, 2012 18:05:29 GMT -5
Mine came in today! Sorry for the blurry pictures. I just snapped them while checking the contents of the package. The resin looks like Old Crow or Demonscape type. And the details are there. They are hard to see in pictures. It comes with lots of parts. 3 types of arms and weapons. Two shoulders (one shoulder is attached to the arm), 3 pairs of torso mounts (two guns and one blank -mine was missing one blank piece), torso, a pair of shoulder mounted launchers, pelvis, upper and lower legs and the two feet. And here is a shot of one gun with an Antenocitis Hunchback (sorry for the semi blurry picture I didn't notice until posting) And next to a large resin model by Orko_one Other pictures It's a big boy.
|
|
|
Post by ski2060 on Dec 6, 2012 19:14:23 GMT -5
Holy cow that is a huge mech! It ought to look good on the field though.
|
|
|
Post by krugenkaiser on Dec 6, 2012 21:29:08 GMT -5
What are those other two mechs?
|
|
|
Post by lordnth on Dec 7, 2012 4:28:41 GMT -5
What are those other two mechs? Highlander IIC and Daishi (PM me for greater details.) Models inspired by Battletech designs for use in 10, 12 & 15mm gaming.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 7, 2012 6:25:04 GMT -5
I've got one of these coming my way as well. Seeing these new pics makes me even more excited.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 21, 2012 17:00:21 GMT -5
Mine arrived today. It's really impressively big. Quality of the cast pieces is really nice. Very few problems, and the bubbles are tiny. I've seen far worse quality in models coming from a certain overpriced battle mallet subsidiary.
|
|
|
Post by thedean on Mar 29, 2013 22:54:43 GMT -5
Know this thread is a few months old, but I am trying to find the perfect infantry for my forces. Can anyone tell me what line the infantry in the first shot belongs to?
|
|
|
Post by papabees on Mar 30, 2013 18:45:11 GMT -5
Know this thread is a few months old, but I am trying to find the perfect infantry for my forces. Can anyone tell me what line the infantry in the first shot belongs to? www.artcrimeproductions.blogspot.com/
|
|
|
Post by shimmeringsword on Jul 16, 2014 16:48:09 GMT -5
Sorry to dig this thread up after such a long time, but I'm hoping some of those that bought this piece can help me. I designed this mech. The only change to my original is a different cockpit, lower arms, and mirrored missile racks, the rest is impressively accurate to my art. However, twogunsblazing did not ask my permission to use this design, and while I'd have been ok with a personal copy made, selling it for profit as he has is way out of line.
I've sent him a PM, but no reply yet. I'm wondering if anyone has an email address or phone number of his that I can use to contact him more directly. He needs a bit of a chat about the meaning of copyright. I'm not holding anything against the buyers here nor taking action on you, it's a shame you all bought stolen work though.
|
|
|
Post by RuneCaster_Aris on Jul 17, 2014 2:30:33 GMT -5
Join the 15mm Scifi Gaming group on facebook, everyone worth their dime is there. Just ask!
|
|
|
Post by Mr. Harold on Jul 17, 2014 14:44:57 GMT -5
Sorry to dig this thread up after such a long time, but I'm hoping some of those that bought this piece can help me. I designed this mech. The only change to my original is a different cockpit, lower arms, and mirrored missile racks, the rest is impressively accurate to my art. However, twogunsblazing did not ask my permission to use this design, and while I'd have been ok with a personal copy made, selling it for profit as he has is way out of line. I've sent him a PM, but no reply yet. I'm wondering if anyone has an email address or phone number of his that I can use to contact him more directly. He needs a bit of a chat about the meaning of copyright. I'm not holding anything against the buyers here nor taking action on you, it's a shame you all bought stolen work though. That's very unfortunate. Do you have a link to your original art?
|
|